Unique Slip-Lock Feature

• Easy to set up, accurate and rapid height adjustments

• Quickly adjusts to any height within the specific model range

• No tools required for set-up or disassembly

• No knobs or wing nuts to adjust

• All tube surfaces have protective anodized coating

How SLIP-LOCK Works

The SLIP-LOCK collar assembly locks automatically when the inner pole is raised vertically to the desired height. As a vertical load is applied downward, the ball-taper lock feature locks tighter. The more pressure applied downward the tighter it will lock. To release the lock, simply raise the inner pole slightly and lift the release ring. For SAFETY, hold the inner pole firmly while raising or lowering the height.

TS712 7ft to 12ft Adjustable Upright - Minimum collapsed height 7ft

                                                        - Maximum extended height 12ft

B1818-HS 460mm / 18" Base Plate

• Heavy gauge zinc-plated steel hook

• Low profile will not snag drapes during installation or removal

• Deep engagement slot minimizes accidental removal from uprights

• Low center of gravity reduces twisting

• Recommended for Backwall Pipe & Drape

• All tubing surfaces have protective clear anodized coating that keeps drapery clean

• 1 9/16" diameter outer aluminium tubing

TDS712 7ft to 12ft Extendable Cross Piece - Minimum collapsed length 7ft

                                                                  - Maximum extended length 12ft